Tips To Make Those Old Floors Look Fabulous

17 October 2016
 Categories: , Blog

When you decide to purchase a home that is considered to be a fixer upper, you now that you will have a lot of work cut out for you from the day you get the keys. As you take your home repairs and renovations one area at a time, you are likely striving to make all of the improvements to your home you are looking to achieve while also keeping your budget in mind. If you have gotten to the point where you are ready to work on the floors in your fixer upper, you may wonder what you can and should do to make those old floors look fabulous. Get to know a few of the steps that you can take to make your old, potentially run-down floor look phenomenal as soon as possible while staying within a budget.

Pull Back Carpets To See What Type Of Floors Are Underneath

If the house you purchased has carpeting, your first instinct may be to just tear out all of the carpets immediately. However, this may be unwise if you do not have the budget to also immediately purchase and install new floors.

Before you rip out the carpets, go ahead and just carefully pull back a section of the carpet (along the walls or in a corner will be the easiest. Look at the floors underneath. In older homes, you may be lucky enough to find hardwood floors still intact underneath. However, if there is only the standard plywood used in modern building, you may want to wait to pull out your carpets until you have a new flooring plant.

Clean or Remove Carpeting

Depending on what you found underneath your carpets, your next step will be to either thoroughly clean your carpets or remove them entirely. If you opt for cleaning your carpets, you will want to do so in multiple steps. First, sprinkle baking soda on all of the carpets in your home and allow that to settle for a while (anywhere from an hour or two to overnight). Then, vacuum your carpets.

After that, you will want to use a carpet steam cleaner to deep clean your carpets. You can purchase a carpet cleaning solution or you can use distilled white vinegar for a more natural yet still highly effective cleaning solution. Be sure that you check your carpet cleaner's instructions to see if you can add pure vinegar or if you need to mix in hot water as well.

Once your carpets dry, you can pass over them once more with the vacuum if you would like and you will be ready to go. Removing the carpet, on the other hand, simply means getting rid of the carpet and the carpet pad and then cleaning the floors underneath.

If You Found Hardwood Floors Underneath, Refinish Them

The hardwood floors underneath the carpeting will likely have sustained some damage from attaching the carpet and carpet pad as well as from general wear and tear. The next step toward getting your floors in good shape is to refinish your hardwood floors.

The refinishing process involves cleaning the hardwood floors with a mop to remove debris and dust. Next, you will need to sand down the surface of the hardwood floors to remove the sealant as well as and scratches or scuff marks. Once you have sanded the surface of the floors, you will then sweep and vacuum the floors to remove all dust, hair, and other debris.

Then, you have a few options. The first is to leave your floors natural without staining them. Or, you can stain and then seal your wood floors to give them a glossy finish or richer color.

With these steps in mind, you can better handle the process of fixing up the floors in your fixer upper house and make your home look as amazing as possible for as long as possible.

For more information, talk to a professional like Idaho Hardwood Flooring.